2022 Buffalo Turbine Dust & Odor Control – Hydraulic BT-HYSS3M

Information

2022 Buffalo Turbine Dust & Odor Control – Hydraulic BT-HYSS3M

The Buffalo Turbine Hydraulic Dust Controller misting system is a permanent solution for any dust and odor control, designed for the Demolition, C&D Recycling and Metal Recycling industries. The Hydraulic Dust Controller can be powered by any hydraulic source that has at least 16 gpm flow rates. Simply connect the Gyratory Atomizing Nozzle to a common 3/4? water line and harness the power of a legendary Buffalo Turbine single stage blower to control and suppress dust and odor particles. Attaches directly to skid-steer style machines, also available in a skid-mount.

Features may include:

  • Hydraulic for Skidsteers and Utility Vehicles with Skidsteer quick mount plate.
  • Hydraulically driven Blower runs off of any existing equipments auxiliary Hydraulics.
  • 16gpm to 25gpm Hydraulic required.
  • Available in Basic skid mount.
  • Gyratory Atomizing Nozzle.
  • 12 volt Oscillation stand is available.
Buffalo Turbine Gyratory Atomizing Nozzle
  • Single, low maintenance non-plugging nozzle generates atomized water mist to control and suppress dust, odor and smoke particulates.
  • Uses standard municipal water pressure and common 3/4? garden hose connection.
  • Adjust water volume from 0 to 20 gallons per minute.
  • Change spray direction with remote control for non-electric models.
  • Horizontal spray over 125' in neutral wind.
  • Vertical spray over 50' in neutral wind.

Photos

Highlights

  • Portland, Oregon
  • 2022
  • Buffalo Turbine
  • Dust & Odor Control – Hydraulic BT-HYSS3M
  • Available
  • 46”
  • Max with nozzle in upright position: 32”

Specifications

  • 2022
  • Buffalo Turbine
  • Dust & Odor Control – Hydraulic
  • BT-HYSS3M
  • General
  • Hydraulic Motor Displacement size: .915 cu.in./Rev
  • Hydraulic
  • Misting System: Gyratory Atomizing Nozzle
  • Minimum Water Volume: 1/3 Gallon Per Minute | Maximum Water Volume: 20 Gallons Per Minute @ 120 psi | Throw Distance Horizontal Up to 125 ft. in Neutral Wind Conditions | Throw Distance Vertical: Up to 50 ft. in Neutral Wind Conditions | Nozzle rotation: 360°
  • Input RPM: Up to 3600 RPM
  • Minimum Water: 40 psi | Maximum Water: 120 psi | Required mininum hydraulic pressure (to operate @ stated values): 2900 psi | Shaft Seal: 150 psi
  • Maximum Hydraulic: 40 GPM
  • Hose Input: 3/4" Utility / Garden Hose | Droplet size: 50-200 Microns | Outlet Size: 12”
  • Frame: 39”
  • with Nozzle: 64”
  • 46”
  • Max with nozzle in upright position: 32”
  • 300 lbs
  • Mounting (any position): SAE “A” size, 2 bolt
  • 10 Year Manufacturer Warranty | Electric Motor: 2 Year Warranty