2022 Buffalo Turbine Dust & Odor Control – PTO BT-CPTOM

Information

2022 Buffalo Turbine Dust & Odor Control – PTO BT-CPTOM

The Buffalo Turbine PTO Dust Controller misting system attaches to common 540 PTO drives for dust suppression in the Demolition, C&D Recycling and Metal Recycling industries. Quick mounts to most three point hitch configurations. Connect the proprietary Gyratory Atomizing Nozzle to a common 3/4? garden hose and harness the power of a legendary Buffalo Turbine single stage turbine to control and suppress dust, odor and smoke particles. At 240lbs, the PTO Dust Controller is by far the lightest option available on the market for controlling dust in a large scale application.

Features may include:

  • Gyratory Atomizing Nozzle
  • 12 volt Remote Nozzle Control w/ 12ft cable
  • Direct Drive Gearbox
  • 12” Round Blower Nozzle for Debris Blowing
  • Cost Effective
  • Lightweight Heavy Duty Steel Construction
  • Low Maintenance
  • Minimum 20 HP required at the PTO
  • Anti Skid Roller
Buffalo Turbine Gyratory Atomizing Nozzle
  • Single, low maintenance non-plugging nozzle generates atomized water mist to control and suppress dust, odor and smoke particulates.
  • Uses standard municipal water pressure and common 3/4? garden hose connection.
  • Adjust water volume from 0 to 20 gallons per minute.
  • Change spray direction with remote control for non-electric models.
  • Horizontal spray over 125' in neutral wind.
  • Vertical spray over 50' in neutral wind.

Photos

Highlights

  • Portland, Oregon
  • 2022
  • Buffalo Turbine
  • Dust & Odor Control – PTO BT-CPTOM
  • Available
  • 22”
  • Max with nozzle in upright position: 24”

Specifications

  • 2022
  • Buffalo Turbine
  • Dust & Odor Control – PTO
  • BT-CPTOM
  • General
  • Recommended HP @ PTO: 20
  • Misting System: Gyratory Atomizing Nozzle
  • Minimum Water Volume: 1/3 Gallon Per Minute | Maximum Water Volume: 20 Gallons Per Minute @ 120 psi | Throw Distance Horizontal: Up to 125 ft. in Neutral Wind Conditions | Throw Distance Vertical: Up to 50 ft. in Neutral Wind Conditions
  • Input RPM: USE ONLY @ 540 RPM PTO SHAFT SPEED MAX | Output RPM: Up to 3780 RPM
  • Minimum Water: 40 psi | Maximum Water: 120 psi
  • Hose Input: 3/4" Utility / Garden Hose | Droplet size: 50-200 Microns | Outlet Size: 12”
  • Frame: 43”
  • with Nozzle: 63”
  • 22”
  • Max with nozzle in upright position: 24”
  • 275 lbs.
  • Input Power: Direct Drive Gearbox
  • 10 Year Manufacturer Warranty