Engine
						
							Engine Manufacturer
							3TNV80F
						
						
							Engine Power
							PS: 18.4 kW (24.7 hp)
						
						
							Rated Engine Speed
							Gross at 3,200 rpm
						
						
							Cylinder Liners
							Three
						
						
							Displacement
							1.27 L (77.3 cu in.)
						
						
							Lubrication
							Full pressure
						
						
							Cooling
							Liquid
						
						
							Air Cleaner
							Pre-cleaner Yes Heavy-duty canister, dry type with safety element and air-restriction indicator
						
						
							Starter
							Operator presence starting system: Brake-N-Go (foot)
						
						Fuel System
						
							Fuel Type
							Diesel or Biodiesel (up to B20)
						
						
							Fuel System
							 Fuel tank switch/shut-off valve
						
						PTO
						
							PTO Type
							Drive: V-belt | Electric clutch
						
						Drivetrain
						
							Drive System
							Wheel motors: Tuff Torq heavy-duty integrated piston wheel motor | Speed and direction control: Zero turn
						
						
							Transmission
							Dual hydrostatic wheel drive TuffTorq heavy-duty ground drive with cross porting for improved cooling
						
						Brakes
						
							Brake System Type
							Dynamic braking: Twin motion control levers | Park brake: Internal wet disk integrated in the transmission | Park brake actuation: Foot brake engagement also brings steering levers to the neutral position
						
						Wheels & Tires
						
							Wheels
							Caster wheels: 13x6.5-6 | Caster wheel: 13x5.0-6 flat free | Drive wheels: 24x12.00-12 4-ply turf
						
						
							Front Wheel
							Anti-scalp rollers: RH, center, LH
						
						
							Rear Wheel
							Anti-scalp rollers: Standard
						
						
							Tires, Rear Specification
							24x12.00-12 4-ply turf | Load rating: 4PR
						
						Battery
						
							Battery
							12 V
						
						Electric
						
							Electrical
							Cold cranking amp: At 18 degrees C, 600 amp | Hour meter: Digital multi-function display
						
						
							Charging System
							75 amp
						
						Operational
						
							Operating Conditions
							Consumption: 4.2-7.2 L/hr (1.1-1.9 U.S. gal./hr)
						
						
							Operating Speed
							Side discharge: approximately 16,000 fpm | Blade tip speed: Approximately 16,500 fpm | Speed range: 0-18.3 km/h (0-11.4 mph) | Forward: 0-18.3 km/h (0-11.4 mph ) | Reverse: 0-7.2 km/h (0-4.5 mph)
						
						Hydraulics
						
							Oil Filter
							Full flow, replaceable, spin-on type | Drivetrain: Internal, replaceable
						
						Dimensions
						
							Cutting Width
							152, 183 cm (60, 72 in)
						
						
							Length
							225 cm (88.6 in) 
						
						
							Width
							With chute down: 188, 218 cm (74, 86 in) | Rear discharge: 161.3, 192.5 cm (63.5, 75.8 in)
						
						
							Height
							With ROPS up: 185 cm (73 in) | With ROPS down: 119 cm (47 in) | Of-cut range: Increments 0.64 cm (0.25 in) / 2.54-14 cm (1-5.5 in)
						
						
							Dimensions
							Mower deck size: 152-cm (60-in) | Blades Thickness: 0.64 cm (0.25 in)
						
						Capacities
						
							Hydraulic Capacity
							5.6 L (5.9 U.S. gal)
						
						
							Fuel Capacity
							Tank: 43.5 L (11.5 U.S. gal.)
						
						
							Features
							Crankcase: 3.4 L (3.6 U.S. qt)
						
						Weights
						
							Weight
							776 to 821 kg (1,711 to 1,810 lb)
						
						Features
						
							Construction Material, Deck
							7-gauge: 4.6-mm (0.179-in.) one-piece forged steel
						
						
							Features
							Blade Number: Three | Mower deck: 7Iron™ PRO side-discharge
						
						Warranty
						
							Warranty
							36 months or 1500 hours, whichever comes first, no hour limitation for the first 24 months.