2024 Ryan® Lawnaire® IV & V Aerators Honda 4.0 HP

Current Ryan® Lawnaire® IV & V Aerators Lawnaire-IV-V-Aerators

Swipe to View More

Year 2024
Make Ryan®
Model Lawnaire® IV & V Aerators

Year 2024
Manufacturer Ryan®
Model Name Lawnaire® IV & V Aerators
Trim Name Honda 4.0 HP
Generic Type (Primary) General
Cycle Time 4
Engine Manufacturer Honda® GX120
Starter recoil start; on/off switch; low-oil alert
Engine Power 4.0 HP
Displacement 7.2 cu in. (118 cc)
Lubrication Grease fittings on the wheels, tine wheels & idler pivot/oil chain

With Easy Steer Technology, the Lawnaire IV & V maneuver around highly landscaped areas fast and efficiently. Designed to rotate independently while driving, innovative tine assemblies allow you to steer without removing the tines from the ground—opening up a whole new world of productivity.

Features may include:

Effortless aeration

Adapt to the job with versatile features and get it done through durable performance

3/4" (19MM) DIAMETER STEEL CORING TINES

Unlike everyone else, our hardened alloy steel coring tines stay in the ground when you turn—and durable enough to keep you out on the turf and out of the shop.

FRONT BUMPER GUARD

Feel confident with your investment with a sturdy front bumper guard, protecting vital components from accidents and mistakes.

FLEXIBLE WEIGHT DISTRIBUTION

Get the exact down pressure and weight distribution you need by attaching or removing weights or adding water to the front drum.

Engine

Cycle Time 4

Engine Manufacturer Honda® GX120

Starter recoil start; on/off switch; low-oil alert

Engine Power 4.0 HP

Displacement 7.2 cu in. (118 cc)

Lubrication Grease fittings on the wheels, tine wheels & idler pivot/oil chain

Drivetrain

Drive System 4L section V-belt | Tine drum: Single #40 nickel-plated chain

Operational

Operating Conditions holes per square foot single pass: Up to 9 per sq ft (59/m2) | productivity: Aerates up to 29,000 sq ft/hr (2,694 m2/hr) at 3.5 mph

Dimensions

Dimensions Tines: 0.75 in. (19 mm) diameter coring-type formed from 0.08 in. (2 mm) hollow, hardened alloy steel | core diameter: 0.75 in. (19 mm) | aeration pattern: 3.75 in. x 7 in. (95 mm x 178 mm)

Depth, Maximum coring depth: Up to 2.75 in. (70 mm)

Width 28 in. (711 mm) | Aerating: 19 in. (483 mm)

Length 53.5 in. (1,359 mm)

Height 48.8 in. (1,240 mm); 30 in. (762 mm) w/ handle folded