Engine
Lubrication
Pressure grease fittings at pivot points and tine wheels
Wheels & Tires
Wheels
Cast iron with sintered bushings; pressure lubrication fitting; grooved for mounting aerating tines on both sides; each wheel weighs 75 lb (34 kg)
Tires, Rear Specification
transport: 16 x 4.80-8, 6-ply
Operational
Operating Speed
towing: 10 mph (16 km/hr) max
Operating Conditions
holes per square foot: Up to 9 (43/m2 ) with single tines; up to 18 (86/m2 ) with double tines | productivity: Up to 3 acres/hr (1.2 ha/hr) at 4 mph (6 km/hr)
Dimensions
Depth, Maximum
Coring: Up to 4 in. (102 mm)
Width
96 in. (2,438 mm) | Aerating: 72 in. (1,829 mm)
Dimensions
aeration pattern: 6 in. x 6 in. (152 mm x 152 mm) with single tines; 3 in. x 3 in. (76 mm x 76 mm) with double tines
Length
60 in. (1,524 mm)
Height
36 in. (914 mm)
Weights
Weight
1,518 lb (689 kg) | tray: Set of 6 included
Features
Frame Type
2 in. steel, 80 pipe
Hitch/Type
Clevis and pin type
Features
Tines: 8 per wheel (96 total); standard one set 0.75 in. (19 mm) coring; wheels can be mounted with double set of tines, 16 per wheel (192 total) | transport lift: Hydraulic cylinder | power: Tractor-draw